You can use a skate tool or the axles of your trucks to pop them in place, make sure you put them in all the way, they shouldn't stick out. You should also use spacers to protect your bearings from getting crushed when you tighten the axle nut.
What do you need for a skateboard setup?
You Need The Following Parts:
What tools do you need to assemble skateboard?
What you need to build your own skateboard
What do you need a skate tool for?
The skate tool is the skateboarder's Swiss Army knife. It allows you to mount hardware and adjust components on the fly. Need to change your wheels, tighten the screws up, change the grip tape, repair the screw thread, or clean the bearings?
How do I loosen my wheels without a skate tool?
As an alternative to the skate tool, take out:
What can I use if I don't have a skate tool?
You don't necessarily need a skate tool, but at the very least you need 3 different sized wrenches, 1 screwdriver, and 1 size of Allen key. The nice thing about a skate tool is that it has all of these tools built into 1 convenient and easy to carry tool.
Can you use a wrench on a skateboard?
A 9/16” wrench (or socket wrench) is used to adjust the kingpin bolt which holds the trucks of the skateboard together. This is tightened or loosened to adjust the tightness of the skateboard's trucks. The wheel bolts use a 1/2” wrench and the board screw nuts use a 3/8” wrench.
What a T tool is useful for?
Otherwise known as a “T-tool”, a skateboard tool is all you need to put together or adjust a skateboard. A skateboard tool is a “T” shaped tool that has three built-in socket wrenches that will adjust every part of the skateboard. This includes the bushings and screws that secure the skateboard's wheels.
Is assembling a skateboard hard?
It's really easy to assemble a skateboard, except for that grip tape. It's a bit harder but really not that big of a deal. I made a detailed step-by-step instruction on how to build your own skateboard. Follow the instruction and you should be fine.
Can you make your own skateboard?
Making a skateboard is, surprisingly enough, not as hard as most people think. Making the deck, or wooden board, only requires a basic knowledge of carpentry, a jigsaw, a skateboard mold, and a vacuum press, but even these can be made at home with a little patience.
Do you put on Griptape before trucks?
Before you screw your trucks to the deck, you should poke holes in the griptape at the truck holes so that you can insert the bolts. Take a bolt from your mounting kit and push it lightly through the truck holes from below.
How long should a skateboard be for a 12 year old?
Skaters that are 13+ or wear an adult shoe size of 8+, should be able to handle a full-sized skateboard (7.5" or wider). We offer mid-sized skateboards (7.25 - 7.375") for kids 9-12 years old, mini skateboards (6.75 - 7.25") for kids 6-8 years old, and even micro skateboards (6.5 - 6.75") for kids under 5 years old.
How big is a 8.0 skateboard?
Most 8.0” decks are 31.75” long. Even though there is no set length for skateboard decks. It's not rare to find 8.0” that are 31.63” or 31.875” long. Depending on the brand, shape and concave, some 8.0” decks can even be significantly longer at 32.35” long, whereas some can be significantly shorter at 30.75”.
Is 8.25 skateboard too big?
Any skateboard between 7.75″ and 8.25″ is a great all-around option for a wide variety of skating styles. Just remember, it's all personal preference, there's no right answer! Skateboard deck length is primarily dependent again on your riding style. Most skateboard decks range from 28”-33” in length.
How do you take trucks off a skateboard without a skate tool?
If you don't have a hammer, you can use your skateboard trucks and still reap the same effects. Use your truck's flat side and press it on the ends of the board's screws, popping them out. If ever your truck can't work, then it's best to use a hammer, a surefire way to definitely get those screws out.
What tool do you use to loosen skateboard trucks?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck. This single bolt controls the tightness of the trucks. It points directly to the ground when you're skating, and is found between the wheels. Turn it clockwise to tighten the trucks, getting tighter turning.
Do you need a bearing press skateboard?
Properly installing bearings into the skateboard is one of the most important tasks of the skateboard build. Without the bearings seated properly in the wheels and the axle nuts tightened down, the board cannot roll freely and quickly.
What tools do you need to tighten a skateboard?
The skate wrench comes in many different shapes and sizes but is essentially the same regardless. Most skate wrenches will be comprised of 4 main components: 1) Kingpin adjustment: this will be the largest gauge socket on your skate wrench and is used to tighten or loosen your kingpin.
What is a skate key?
Noun. skate key (plural skate keys) A small wrench used to adjust old-fashioned roller skates of the kind that were fitted to the wearer's shoes.
How much do skateboard bearings cost?
Skateboard bearing's price varies depending on the quality and materials used. Their average cost ranges from $8 to $150, and a decent set is around $40. Higher quality bearings, of course, are more expensive compared to cheap bearings.
How do you take the wheels off a skateboard?
ncG1vNJzZmiZnKG8tsDFqKatmpGhuW%2BvzmespGeWlr5wr8CnZLKnpWLApsCMrqdmmV2ouKLAxJummqqUYsSqwMeorK1lkWLArK3TnmStp5%2Bh